Stable isotopes of water show deep seasonal recharge in northern bogs and fens          下载免费PDF全文

Zeno F. Levy  Donald I. Siegel  Soumitri S. Dasgupta  Paul H. Glaser  Jeffrey M. Welker 《水文研究》2014,28(18):4938-4952

Ground water recharge is assumed to occur primarily at raised bog crests in northern peatlands, which are globally significant terrestrial carbon reservoirs. We synoptically surveyed vertical profiles of peat pore water δ¹⁸O and δ²H from a range of bog and fen landforms across the Glacial Lake Agassiz Peatlands, northern Minnesota. Contrary to our expectations, we find that local‐scale recharge penetrates to not only the basal peat at topographically high bog crests but also transitional Sphagnum lawns and low‐lying fen water tracks. Surface landscape characteristics appear to control the isotopic composition of the deeper pore waters (depths ≥0.5 m), which are partitioned into discrete ranges of δ¹⁸O on the basis of landform type (mean ± standard deviation for bog crests = ?11.9 ± 0.4‰, lawns = ?10.6 ± 0.1‰, fen water tracks = ?8.8 ± 1.0‰). Fen water tracks have a shallow free‐water surface that is seasonally enriched by isotope fractionating evaporation, fingerprinting recharge to underlying pore waters at depths ≥3 m. Isotope mass balance calculations indicate on average 12% of the waters we sampled from the basal peat of the fen water tracks was lost to surface evaporation, which occurred prior to advection and dispersion into the underlying formation. These new data provide direct support for the hypothesis that methane production in deeper peat strata is fuelled by the downward transport of labile carbon substrates from the surface of northern peat basins. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Zircon U–Pb ages and Hf isotope compositions of migmatites from the North Qinling terrane and their geological implications     

Q. Liu  Y.‐B. Wu  H. Wang  S. Gao  Z.‐W. Qin  X.‐C. Liu  S.‐H. Yang  H.‐J. Gong 《Journal of Metamorphic Geology》2014,32(2):177-193

Migmatites are predominant in the North Qinling (NQ) orogen, but their formation ages are poorly constrained. This paper presents a combined study of cathodoluminescence imaging, U–Pb age, trace element and Hf isotopes of zircon in migmatites from the NQ unit. In the migmatites, most zircon grains occur as new, homogeneous crystals, while some are present as overgrowth rims around inherited cores. Morphological and trace element features suggest that the zircon crystals are metamorphic and formed during partial melting. The inherited cores have oscillatory zoning and yield U–Pb ages of c. 900 Ma, representing their protolith ages. The early Neoproterozoic protoliths probably formed in an active continental margin, being a response to the assembly of the supercontinent Rodinia. The migmatite zircon yields Hf model ages of 1911 ± 20 to 990 ± 22 Ma, indicating that the protoliths were derived from reworking of Palaeoproterozoic to Neoproterozoic crustal materials. The anatexis zircon yields formation ages ranging from 455 ± 5 to 420 ± 4 Ma, with a peak at c. 435 Ma. Combined with previous results, we suggest that the migmatization of the NQ terrane occurred at c. 455–400 Ma. The migmatization was c. 50 Ma later than the c. 490 Ma ultra‐high‐P (UHP) metamorphism, indicating that they occurred in two independent tectonic events. By contrast, the migmatization was coeval with the granulite facies metamorphism and the granitic magmatism in the NQ unit, which collectively argue for their formation due to the northward subduction of the Shangdan Ocean. UHP rocks were distributed mainly along the northern margin and occasionally in the inner part of the NQ unit, indicating that they were exhumed along the northern edge and detached from the basement by the subsequent migmatization process.  相似文献   

GEOCHEMISTRY     

《Abstract of Chinese Geological Literature》2014,(3)

正20141357 Guo Tao(School of Mathematics and Science,Shijiazhuang University of Economics,Shijiazhuang 050031,China);Hu Jiawen Assessment on the New Pressure-Volume-Temperature(PVT) Data of Supercritical Water(Geological Journal of China Universities,ISSN1006-7493,CN32-1440/P,19(3),2013,p.447-455,9 illus.,3 tables,32 refs.)Key words:supercritical fluids  相似文献   

OCEANOGRAPHY & MARINE GEOLOGY     

《Abstract of Chinese Geological Literature》2014,(3)

正20141271Chang Fengming(Key Laboratory of Marine Geology and Environment,Institute of Oceanology,Chinese Academy of Sciences,Qingdao 266071,China);Li Tiegang Progress in the Paleoceanography of the Western Pacific Warm Pool:A Review(Advances in Earth Science,ISSN1001-8166,CN62-1091/P,28(8),2013,p.847-858,3 illus.,108 refs.)Key words:paleooceanography,West Pacific  相似文献   

羌塘中部白措花岗岩岩石地球化学特征、锆石U Pb年龄和Hf同位素组成及其构造意义     

李学仁  万友利  王剑 《地质论评》2020,66(5):1172-1185

本文对羌塘中部白措花岗岩的研究表明，岩体是由花岗闪长岩和二长花岗岩同时侵位的复合岩基，锆石U Pb年龄分别为213. 8±1. 3 Ma、210. 0±1. 1 Ma和208. 1±1. 4 Ma。白措花岗岩为硅过饱和的准铝质—弱过铝质岩石，Eu负异常明显，富集大离子亲石元素，亏损高场强元素，显示典型的壳源特征。εHft)为负值，主要集中于-10～-15，对应的Hf同位素二阶段模式年龄峰值为1. 78 Ga，显示源区为古元古代古老地壳；同时，花岗岩中含有大量闪长质暗色包体，表明有壳幔岩浆混合作用，推测为同时期玄武质岩浆的底侵作用，在地壳深部诱发富硅质基底岩石重熔，快速喷发形成玄武岩—流纹岩双峰式组合，而花岗岩则是由玄武质岩浆在地壳充分熔融后，岩浆沿羌塘中部已有的构造破碎带侵入形成，并且在熔融过程中有镁铁质岩浆注入少量结晶的长英质岩浆中形成暗色包体。因此，花岗岩与双峰式火山岩是同一裂陷动力机制的产物。花岗岩的侵入预示了晚三叠世羌塘盆地构造岩浆活动的结束，之上开始了羌塘侏罗纪海相盆地的沉积。  相似文献   

滇西镇康放羊山Cu-Pb-Zn多金属矿床流体包裹体和C-O同位素研究     

陈伟  邓明国  耿齐卫  管申进  孔志岗  贾祯  张海 《岩石矿物学杂志》2020,39(6):780-794

滇西镇康放羊山Cu-Pb-Zn多金属矿床是保山地块发现的首个富铜的铅锌多金属矿床。为探讨其成矿流体来源和矿床成因，对该矿床开展了流体包裹体和C-O同位素研究。结果表明，阶段Ⅱ主要发育富液相包裹体，均一温度和盐度（NaCl_eq，质量分数）集中在240～300℃和8.0%～18.0%；阶段Ⅲ以含CO₂和子矿物包裹体为特征，均一温度和盐度的两个峰值为360～400℃、16.0%～24.0%和240～320℃、4.0%～14.0%；阶段Ⅳ以富液相和纯液相包裹体为主，均一温度和盐度降低至220～340℃和8.0%～14.0%。C-O同位素分析结果（δ¹³C_V-PDB值为-5.88‰~-2.37‰，δ¹⁸O_V-SMOW值为8.18‰~12.79‰）显示成矿流体主要来源于岩浆热液，在迁移过程中受到围岩溶解作用的影响。综合研究认为，放羊山矿床阶段Ⅱ和阶段Ⅲ的成矿流体主要来源于大陆碰撞形成的中高温、中高盐度、富CO₂岩浆热液，在阶段Ⅲ晚期和阶段Ⅳ受到中低温、低盐度大气降水的影响；矿床为受构造控制明显的中高温热液矿床，预测在矿区深部有望找到矽卡岩型矿体。  相似文献   

黑龙江省东宁县五道沟金矿成矿流体特征及矿床成因     

方焱  何谋惷  丁振举  徐怡然  魏连喜 《现代地质》2020,34(2):254-265

五道沟金矿位于太平岭金-铜多金属成矿带,矿体呈脉状赋存于下二叠统双桥子组碳质板岩中,并严格受NE向断裂控制。根据野外观察和岩相学研究,将五道沟金矿成矿划分为早期石英阶段、石英-黄铁矿阶段、石英-碳酸盐阶段3个阶段,其中石英-黄铁矿阶段为主要成矿阶段。石英流体包裹体显微测温和拉曼光谱分析表明,金成矿期流体为中低温、低盐度的含CO₂流体。氢氧同位素分析表明,成矿流体是岩浆水和大气降水的混合流体。黄铁矿微量元素特征表明矿区内黄铁矿为岩浆热液成因;矿石硫同位素数据显示其具有岩浆硫和地层硫的混合特征。铅同位素组成图上,矿石铅、围岩铅和岩浆岩铅三者呈线性关系,具有同源特征,矿石中²⁰⁷Pb/²⁰⁴Pb和²⁰⁸Pb/²⁰⁴Pb值明显高于围岩的相应值,暗示了矿石铅为围岩铅淋滤产物。矿石同位素特征表明双桥子组碳质板岩应为金矿矿源层。综合矿床地质特征、流体包裹体和H-O-S-Pb同位素分析,认为五道沟金矿为造山型金矿。  相似文献   

铁同位素分析测试技术研究进展   总被引：5，自引：3，他引：2  

秦燕  徐衍明  侯可军  李延河  陈蕾 《岩矿测试》2020,39(2):151-161

铁是地球上丰度最高的变价元素,在自然界大量分布于各类矿物、岩石、流体和生物体中,并广泛参与成岩作用、成矿作用、热液活动和生命活动过程。铁同位素组成对地球化学、天体化学和生物化学方面提供重要的信息,是同位素地球化学研究领域的热点。铁同位素的精确测量是开展相关研究的重要基础。本文评述了铁同位素测试技术的研究进展,主要包括:①溶液法测试铁同位素样品纯化过程中阴离子树脂的改进;②质谱分析从传统的热电离质谱法发展为多接收电感耦合等离子体质谱法;③激光微区原位测试技术的研发等。在此基础上,对测试过程中会导致产生铁同位素分馏的步骤和校正方法进行了总结,并对各种测试方法的优缺点进行了评述。本文认为:溶液法分析流程长且复杂,但分析精度高(0.03‰,2SD)、方法稳定;微区原位分析方法从纳秒激光剥蚀发展为飞秒激光剥蚀,脉冲持续时间更短、脉冲峰值强度更高(可达10~(12)W),聚焦强度超过10~(20)W/cm~2,使其具有分析速度快、空间分辨率高的优势。微区原位法可以从微观角度去讨论铁同位素变化的地球化学过程,但基体效应的存在限制了微区原位铁同位素的广泛应用。因此,缩短溶液法分析流程,开发系列基体匹配的标准样品,是铁同位素分析方法研发的方向。  相似文献   

Geochemistry,detrital zircon geochronology and Hf isotope of the clastic rocks in southern Tibet: Implications for the Jurassic-Cretaceous tectonic evolution of the Lhasa terrane     

《Gondwana Research》2020

In order to reconstruct tectonic evolution history of the southern margin of Asia (i.e., Lhasa terrane) before the India-Asia collision, here we present a comprehensive study on the clastic rocks in the southern Lhasa terrane with new perspectives from sedimentary geochemistry, detrital zircon geochronology and Hf isotope. Clasts from the Jurassic-Early Cretaceous sedimentary sequences (i.e., Yeba and Chumulong Formations) display high compositional maturity and experienced moderate to high degree of chemical weathering, whereas those from the late Early-Late Cretaceous sequences (Ngamring and Shexing Formations) are characterized by low compositional maturity with insignificant chemical weathering. Our results lead to a coherent scenario for the evolution history of the Lhasa terrane. During the Early-Middle Jurassic (∼192-168Ma), the Lhasa terrane was speculated to be an isolated geological block. The Yeba Formation is best understood as being deposited in a back-arc basin induced by northward subduction of the Neo-Tethys ocean with sediments coming from the interiors of the Lhasa terrane. The Middle Jurassic-Early Cretaceous Lhasa-Qiangtang collision resulted in the formation of a composite foreland basin with southward-flowing rivers carrying clastic materials from the uplifted northern Lhasa and/or Qiangtang terranes. During the late Early-Late Cretaceous (∼104-72Ma), the Gangdese magmatic arc was uplifted rapidly above the sea level, forming turbidites (Ngamring Formation) in the Xigaze forearc basin and fluvial red beds (Shexing Formation) on the retro-arc side. At the end of Late Cretaceous, the Lhasa terrane was likely to have been uplifted to high elevation forming an Andean-type margin resembling the modern South America before the India-Asia collision.  相似文献   

Response of hybrid isolation system during a shake table experiment of a full‐scale isolated building     

Keri L. Ryan  Taichiro Okazaki  Camila B. Coria  Eiji Sato  Tomohiro Sasaki 《地震工程与结构动力学》2018,47(11):2214-2232

A full‐scale 5‐story steel moment frame building was subjected to a series of earthquake excitations using the E‐Defense shake table in August, 2011. For one of the test configurations, the building was seismically isolated by a hybrid system of lead‐rubber bearings and low friction roller bearings known as cross‐linear bearings, and was designed for a very rare 100 000‐year return period earthquake at a Central and Eastern US soil site. The building was subject to 15 trials including sinusoidal input, recorded motions and simulated earthquakes, 2D and 3D input, and a range of intensities including some beyond the design basis level. The experimental program was one of the first system‐level full‐scale validations of seismic isolation and the first known full‐scale experiment of a hybrid isolation system incorporating lead‐rubber and low friction bearings. Stable response of the hybrid isolation system was demonstrated at displacement demands up to 550 mm and shear strain in excess of 200%. Torsional amplifications were within the new factor stipulated by the code provisions. Axial force was observed to transfer from the lead‐rubber bearings to the cross‐linear bearings at large displacements, and the force transfer at large displacements exceeded that predicted by basic calculations. The force transfer occurred primarily because of the flexural rigidity of the base diaphragm and the larger vertical stiffness of the cross‐linear bearings relative to the lead‐rubber bearings.  相似文献